RSU rubber mixes

RSU rubber mixes are based on siloxane rubbers and produced in the following grades: RSU-01, RSU-02, RSU-02 “B”, RSU-03, RSU-04. They are used for the manufacture of heat and frost resistant rubber products, that perform in the temperature range from -50 to +250°C in any climatic zones and in electric field conditions.

Order

Application Characteristics

Application

Application

They are used for the manufacture of heat and frost resistant rubber products, that perform in the temperature range from -50 to +250°C in any climatic zones and in electric field conditions.

Characteristics

Specification 2512-027-05766764-98

Technical characteristics

Parameters	RSU-01	RSU-02	RSU-03	RSU-04	RSU-02 “B”
Plasticity, within the range of	0.35-0.60	0.30-0.60	—
Elongation at break, %, minimum	300	200	200	100	150
Nominal tensile strength, MPa, minimum	6.40		2.45		5.30
Frost resistance factor for elastic recovery after compression at -50°С, minimum	0.45		0.50	0.60	—
Weight change after aging in M8G2k (M6₃/12G₁) oil at 125°C for 24 hours, %, maximum	15		—		15
Weight change after aging in Tosol A-40M at 105°C for 24 hours, %, maximum	4		—		4
Tear strength, kN/m, minimum	14.7	9.8	—
Shore A hardness, units, within the range of or minimum	55-70	65-80	35-55	42-62	70
Relative residual deformation at 20% compression in air for 24 hours at +200 °С, %, maximum	55	40	45	35	60

Packing:

In the form of up to 10 kg pieces. The pieces are wrapped in polyethylene film and placed in a polyethylene bag. Then polyethylene bag with rubber mix is packed in synthetic fabric bags. Net weight of one bag is not more than 30 kg.

Guaranteed shelf life:

RSU-01, RSU-02, RSU-02 “B” – 2 months,

RSU-03, RSU-04- 6 months

Guarantee:

The product is manufactured according to the Specification. The product meets the stated information within the shelf life and subject to storage conditions.