SDS compound

SDS compound is an organosilicon compound based on low molecular weight dimethylsiloxane rubber. It is a two-component molding material that has the ability to change from a viscous flowing state to a rubber-like state after mixing the paste with the catalyst at 15 to 30°C. Time to complete curing of 2 mm thick SDS compound is 24 to 72 hours. SDS compound is intended for manufacture of elastic molds for molding of plastic, plaster products. Working temperature range from -600С to +3000С.

Order

Application Characteristics

Application

SDS compound is intended for manufacture of elastic molds for molding of plastic, plaster products.

Characteristics

Specification 2513-048-05766764-2008

Technical characteristics

Parameters	Value
Pot life after mixing paste with catalyst, h, within the range of	0.5 — 6
Nominal tensile strength, MPa, minimum	0.8
Elongation at break, %, minimum	250
Shore A hardness, units, minimum	10

Packing:

SDS compound is shipped as a set: paste and catalyst.

Paste is packaged in polymer and metal containers.

Catalyst is packaged in glass bottles.

Guaranteed shelf life:

Paste – 12 months,

Catalyst – 24 months

Guarantee:
The product is manufactured according to the Specification. The product meets the stated information within the shelf life and subject to storage conditions.