RUS
ENG
Azerbaijani
Arab
Spanish
Kazakh
Chinese
German
Persian
Tajik
Turkish
Uzbek
French
HindiKS organosilicon heat-resistant adhesive
KS adhesive is a paste-like composition that cures at room temperature upon contact with air moisture (in a single-component version) or when mixed with K-10 hardener (in a two-component version). KS adhesive is intended for bonding cured organosilicon rubbers products together, with metals, plastics, for bonding glass, ceramics and other silicate-based materials used in air in high humidity conditions in the temperature range from -60 to +250 °C. Service life at 200°С is not less than 1000 hours. The glue is produced in two grades KS-5 and KS-5M. KS-5M glue features enhanced adhesive performance.
It is intended for bonding cured organosilicon rubbers products together, with metals, plastics, for bonding glass, ceramics and other silicate-based materials used in air in high humidity conditions in the temperature range from -60 to +250 °C.
The glue is produced in two grades KS-5 and KS-5M. KS-5M glue features enhanced adhesive performance.
Specification 38.103483-80
Properties
The operational life at 200 ° C is not less than 1,000 hours.
Technical characteristics
|
Parameters |
KS-5 |
KS-5M |
|
Pot life after squeezing from the tube, minutes, minimum |
10-60 |
|
|
SShR-73-2K rubber / phenolic plastic peel strength, MN/m2, minimum |
0.98 |
1.18 |
|
Dielectric strength, kV/mm, minimum |
15 |
|
|
Volume resistivity, Ohm.cm, minimum |
1*10 |
|
Packing:
The single-component version of the adhesive is packaged in 50 to 200 g. aluminum tubes, the two-component version is supplied in canisters, metal drums, polymer containers.
Guaranteed shelf life:
Adhesive in a tube packing – 6 months, paste – 12 months.
Guarantee:
The product is manufactured according to the Specification. The product meets the stated information within the shelf life and subject to storage conditions.