P-6, P6-BА, RBA, EDA-50, RDA-800, PV, PS polyesters
P-6 grades polyesters are polyesters based on diol polyethylene adipate, are a solid waxy substance. P-6BA polyester is a non-crystallizing polyester based on glycols and adipic acid, a salvelike substance. PBA polyester is a 1,4 polyester of butanediol and adipic acid. EDA-50 polyester is a polyester based on diethylene glycol and adipic acid, it is a viscous liquid. PV polyester is a low-branched mixed polyester based on diethylene glycol and adipic acid, a transparent homogeneous liquid. PS polyester is a low-branched mixed polyester based on diethylene glycol and adipic acid, a transparent homogeneous liquid. PDA-800 is a transparent homogeneous liquid. Polyesters do not have toxic properties and are physiologically harmless.
P-6 polyester is used as a base component in production of polyurethane elastomers, elastomer coatings, microcellular elastomers and integral foams; in production of polyurethanes, in production of structural, shock-absorbing and sealing assemblies of machines and mechanisms operating in contact with oil and oil refinery products; in production of urethane systems for the manufacture of shoes, in production of seals, waterproofing and anti-corrosion compounds and coatings.
P-6BA polyester is used in production of the entire range of polyurethane elastomers, adhesives, coatings, microcellular and integral foams; production of elastic liners, ball joints, gaskets and seals.
PBA polyester is intended for production of urethane rubbers, wear-resistant rubber products based on them, monolithic and porous products by injection molding.
EDA-50 polyester is used for production of non-crystallizing urethane rubbers and polyurethane foam for shoe soles.
PDA-800 polyester is designed for improvement of elastic properties of enamels and paints; production of SKU-10 light sensitive urethane polymers, as a component of adhesive compositions, in compounds based on polyvinyl acetate compositions.
PV polyester is designed for manufacture of printing rollers in the printing industry, polyurethane compositions.
PS polyester is used for production of building mastics and pastes, polyurethane compositions.
P-6, P6-BA, PBA, EDA-50 (Specification 38.103582-85),
PDA-800 (Specification 38.103287-80),
PV (Specification 38.103294-79),
PS (Specification 38.103260-80)
Technical characteristics
Parameters |
P-6 |
P-6BA |
PBA-II |
PBA-III |
EDA-50 |
PDA-800 |
PV |
PS |
|
Grade I |
Grade II |
||||||||
Mass fraction of hydroxyl groups, %, within the range of |
1.60-1.90 |
1.50-1.80 |
1.60-1.90 |
1.05-1.20 |
1.50-1.90 |
4,10-4,40 |
2,00- 2,30 |
2,30-2,60 |
2,00-3,20 |
Viscosity, Pa∙s, within the range of |
|
|
|
|
|
|
|
|
|
— at 25 °C |
— |
— |
— |
— |
5.0-12.0 |
0,9-1,4 |
4,0-5,0 |
6,0-8,0 |
2,5-5,5 |
— at 60 °C |
0.85-1.25 |
1.00-1.50 |
— |
— |
— |
— |
— |
— |
— |
Acid number, mg KOH/g, maximum |
1.3 |
0.9 |
1.0 |
0.4 |
1.0 |
1,2 |
— |
||
Mass fraction of water, %, maximum |
0.08 |
0.10 |
0.08 |
0.07 |
0.10 |
Packing:
Metal containers with anti-corrosion coating.
Guaranteed shelf life:
12 months
Guarantee:
The product is manufactured according to the Specification. The product meets the stated information within the shelf life and subject to storage conditions.